Aerosols
CITRO-SOLV
Our new formula has the same great performance as our previous formula while complying with V.O.C. guidelines. The safest alternative to using chlorinated solvents for degreasing metal surfaces. Heavy flushing action quickly dissolves and removes grease, grime, oil, and tar. High-pressure spray penetrates, loosens and lifts contaminates away. Parts can be rinsed with water.
DRY MOLY
A superior, long-lasting, extreme condition, dry film lubricant, and anti-seize coating. Withstands high temperatures and extreme pressures. It provides a dry film lube especially suited for use in dirty or dusty atmospheres. Burnishes into the metal to provide long-term lubrication and protection. Resistant to water, oil, alkalis, and acids.
DRY MOLY MC FREE
Withstands high temperatures and extreme pressures. It provides a dry film lube especially suited for use in dirty or dusty atmospheres. Burnishes into the metal to provide long-term lubrication and protection. Resistant to water, oil, alkalis, and acids. Methylene chloride-free formula is more user-friendly and accepted by safety directors who disapprove of chlorinated solvents.
ENVIROZONE
Non-flammable, all-purpose, non-conductive mechanic’s spray. Penetrates through rust and corrosion to loosen frozen nuts and bolts. Displaces moisture in wet electrical systems. Leaves treated surfaces protected with the residual anti-corrosive film. It does not contain any chlorinated solvents. Safe around most plastic and paint. 39,000-volt dielectric strength.
FOAM BLASTER
A unique aerosol foam which enables simple and easy degreasing of tools, parts, workbenches, vent covers, machinery, coils, industrial equipment, concrete and more! Sprays as an engulfing, heavy-duty foam that clings to surfaces and provides extended degreasing contact time. Provides a self-indicating foam which quickly breaks down grease and grime and becomes discolored, indicating grease and grime are ready to be flushed away. Deodorizes as it degreases, leaving the area with a fresh citrus aroma.
FOAMING CHAIN & CABLE LUBRICANT
Fortified with Moly – C1 Chain & Cable Lube provides superior penetrating action to rollers, pins, links, and bushings of chains. It leaves a lubricating film, which reduces friction, wear, and corrosion. When applied to wire ropes and cables, the Moly and other additives plate the strands to provide anti-wear and rust protection. Moly is molybdenum disulfide – a chemical compound with the symbol MoS2.
HP INDUSTRIAL
METAL PARTS PROTECTOR
It provides a long-lasting, anti-rust and anti-corrosion film that is flexible, semi-hard and
dirt-resistant. A long-term, flexible, non-tacky, dust-resistant coating that will not crack, peel, flake or chip over a wide temperature range (-40°F to +175°F). Adheres to most clean metal surfaces.
USE ON: Molds, offshore drilling parts, outdoor airport ground-handling equipment, castings, metal parts in-ground or ocean transit, seasonal equipment in storage and any metal part needing to be temporarily sealed against corrosion.
NUVISION
Truly an outstanding all-around glass cleaner for use in industrial and institutional settings, glass and mirror manufacturing, window installation, vehicle detailing, windshield replacement, marine/RV and more.
PENETRATING LUBRICANT
SILVER ANTISEIZE
Resistant to chemicals, solvents, and gases (except oxygen). It is effective in temperatures ranging from -20°F to +2000°F. It helps cool bearings. It contains no chlorinated or fluorinated solvents.
VANDALISM & MARK REMOVER
Sprays a thick, powerful gel that provides extended contact time by clinging to vertical surfaces and quickly dissolving vandalism marks. Removes marks from baked enamel, oil-based painted surfaces, metal, tile, concrete, brick, stone, masonry and ceramic materials.
Want to create an account with us?
Get a free quote on our available products, or start a conversation about creating a formula specific to your company needs.